Hydraulic Filters are components that connect hydraulic hoses, pipes, and tubes. To preserve seal quality, hose pressure, and decrease the danger of torqueing, it’s critical to select the suitable hydraulic hose fitting. There is a large selection of hydraulic hose fittings available online, and we’ve created this guide to assist you in selecting the right ones for your needs.
- Sizing
Choosing the right size is critical for optimal performance. The size of the vessels to which a hydraulic fitting is linked determines its size. The inside diameter (ID) and exterior diameter (OD) of tubes, hoses, and pipes are measured in inches (in) or millimetres (mm). If the fitting is too big or too tiny, it will not connect or seal effectively, affecting the hose’s performance.
- Material
Hydraulic Power Units are made out of a variety of materials such as brass, aluminium, cast iron, steel, and polymers. Because high pressures need greater strength materials, metals are more typically utilised than plastics. Maintaining seal quality and hose pressure requires the use of the proper material.
The following is a breakdown of our materials:
Brass is a sturdy, long-lasting, and corrosion-resistant metal.
Because of its machinability and high performance, the material is frequently utilised for smaller compression.
Because of its corrosion resistance and low density, aluminium has a low tensile strength. Due to its lack of strength, this material should not be preferred over brass for high-pressure hydraulic systems.
Steel is a robust and long-lasting material with high heat resistance. To increase its low corrosion resistance, it is usually alloyed with other materials. Stainless steel has a stronger corrosion resistance than materials like brass and aluminium, although it is often more costly.
Choosing the right material for Hydraulic Hose With Fittings is critical for hydraulic systems to keep the hose in good working order. Although each metal has its own set of advantages at Industrial levels, brass is the best choice for hose fittings since it is a cost-effective, low-cost option with a robust and lasting density. Brass fittings are used in the hydraulic and pneumatic sectors for a variety of media, including but not limited to water, oil, and air. Look through our selection of brass fittings and brass hose tails.
When choosing a hydraulic hose fitting, consider the pressure rating. Hydraulic systems generate a lot of pressure, which needs to be restrained by the hose fitting to avoid torqueing. The maximum operating pressure of the hose and the fitting component is used to rate a hose assembly. Hose fittings that aren’t working properly might put machine workers in danger.
Although they may appear to some as minor components of a hose system, they are an incredibly critical fluid power transmission component. Before making a purchase, think about the product’s dependability.
For years, JIC fittings have been the industry standard, and O rings are highly regarded because of their seal fits, which limit the possibility of torqueing.
