If your car doesn’t start, the problem could be any of several different things. Some of the more common issues include a weak battery, a failing alternator, and a bad starter motor. Always get your car serviced by reputed car service centre Melbourne.
Let’s take a look at why each of these issues is so common.
Weak battery
The first reason why your car may not start is that the battery is dead. If you have driven your car for a long time without starting it, the battery eventually dies and needs to be recharged. If you are having trouble with starting your car, get it checked by the car service centre Melbourne.
Failing alternator
If your car won’t start, it could be due to a failing alternator. The alternator is a part of the engine that charges the battery and keeps it at a certain voltage. If you were to run out of gas, this would prevent your car from starting because there is no way for it to get power without gas being burned in order for the engine to turn on.
So what causes an alternator failure? Well, many different things can go wrong with an alternator such as long-term use or incorrect voltage settings. You may also have a bad belt or another electrical problem that could cause problems with your vehicle’s ability to start up properly when needed most!
Bad starter motor
If your car doesn’t start, it may be caused by a bad starter motor. This can happen in one of two ways:
- The starter motor starts to engage, but then stops. The most common reason for this is a worn-out or damaged solenoid—a component that controls the electrical current running through the starter motor when you turn your key in the ignition.
- A low battery can also cause this problem because it doesn’t have enough power to turn over your vehicle’s engine or even keep a working solenoid active for long periods of time.
- If your car makes a clicking noise when you attempt to start it, it could be due to an internal malfunction within your vehicle’s wiring system itself (though this is less likely than with other electrical issues).
- In addition, if there are no warning lights on while trying to start up and no noises coming from underneath where parts would normally make noise under normal operation conditions (such as fans), then there might not actually be anything wrong with either piece of equipment despite what sounds like trouble at first glance!
Fuel-related issue
- Fuel pump: This is a common reason for your car not to start. The fuel pump is the heart of your vehicle’s engine and therefore if it fails, your car will not run. The fuel pump can be tested by removing the fuel filter and checking its pressure with a gauge or even visually inspecting it if there are cracks or leaks in the line.
- If you suspect that your vehicle has a faulty fuel pump, have it replaced at once by an auto repair professional.
- Fuel filter: A bad or clogged filter can also cause problems with starting up your car due to an insufficient supply of clean fuel reaching the engine cylinders. To correct this issue, simply replace the old one with a new one from any auto parts store near you (even Walmart).
- Fuel injectors: If there is no spark at all when trying to start up your vehicle usually means that there’s an issue with its ignition system; something that needs attention from an ASE-certified technician before driving again! Otherwise, other components like spark plugs may need replacement too.
Conclusion
Hopefully, this article has given you a better understanding of why your car won’t start. If it’s under warranty, take it back to the dealer for repair or car service centre Melbourne.
If not, there are some things you can try yourself before calling a mechanic in for help. Always remember that safety comes first when dealing with electrical issues!
