Digital Guru Flooring What Do You Need to Know About Sanding Timber Floors?

What Do You Need to Know About Sanding Timber Floors?

What Do You Need to Know About Sanding Timber Floors? post thumbnail image

Sanding and polishing your home’s timber floors can drastically enhance their appearance. You’ll add texture and character to the timber, and create a surface that will last for years to come. In this guide, we’ll discuss everything you need to know about Timber Floor Sanding Melbourne: what it involves, why you should do it and how much it costs.

This guide’ll tell you what you need to know about

  • What is sanding timber floors?
  • Why is it important to sand your timber floors?
  • Where can you get your timber floors sanded?
  • How much does it cost to have your hardwood floors sanded? (And what’s included in the price.)
  • Do I need to move all my furniture out of the room before I start?

Why sand timber floors?

Sanding timber floors is a great way to improve the look of your floor. It will give you a more even finish, remove scratches, remove stains, and allow you to recoat the floor with clear varnish or polyurethane. In this article we’ll take a look at what sanding timber floors involves and how to do it properly.

What are the benefits of sanding timber floors?

  • Removes dirt, grease and grime. Sanding timber floors removes dirt and surface contaminants that can create an uneven floor. It also removes stains left by spills of oily liquids, like paint or varnish.
  • Removes scratches and dents. Sanding timber floors also smooths out scratches made by furniture rubbing against the floorboards, as well as dents caused by heavy objects being dropped onto them (or even just heavy feet!).
  • Removes old finish. Finishing with a new stain or sealant often requires sanding first because it is only possible to apply such products to flat surfaces so any bumps will prevent adhesion from occurring properly – not only do you need to make sure your finished colour will adhere well but also ensure there are no bumps between coats which would prevent them from sticking together properly!

Where can I get my timber floors sanded?

If you’re looking for a good place to have your timber floors sanded, the best way to find one is by asking around. Find out if anyone in your neighborhood has had their floor sanded recently, and get their recommendation. If not, ask around at work or at church—it never hurts to ask!

Once you’ve found a few different options, make sure to check them out before choosing one company. Go online and take a look at each company’s website; some may even offer photos of the floor sanding process in action. Ask for references from previous customers: how happy were they with the job? What about after the job was finished? What did they think of the service?

Next up: getting quotes from each company based on what type of wood flooring system you have chosen (boards vs planks). Make sure they explain everything in detail—costs included—and make sure they give you a breakdown so there are no surprises when it comes time for payment! Lastly, get detailed information about their warranty on workmanship as well as any other guarantees offered by them before making your decision final…

Do I need to move all my furniture out of the room before you start?

Yes, in most cases you’ll need to move all your furniture out of the room before we start. If you don’t, there’s a risk that it will get damaged by our sanding equipment.

If this isn’t possible for whatever reason then please let us know when you book your appointment so we can discuss how best to get around any difficulties. One solution would be putting protective sheets over any remaining items which will keep them safe from being damaged by dust particles or stray sawdust and other debris that might come from working on the floor.

Timber Floor Sanding Melbourne

Will the process create a lot of dust?

The answer is yes, but not much. The dust created during sanding timber floors is contained in a sealed environment and removed easily by vacuuming or sweeping. It will also be removed from your home during cleaning, so it’s not something you have to worry about. The dust may cause irritation if inhaled into your lungs but this can be avoided by wearing respirators when sanding.

The main reason people avoid sanding timber floors is because they think it’s harmful due to the fine particles of wood that are released into the air when they’re cut down and planks are stacked up together in a pile before being sawn into boards which are then turned into floorboards using circular saws or lasers (the latter option being more expensive).

However, there aren’t any studies linking high levels of particulate matter exposure with negative health effects such as asthma attacks: these come from environmental pollution elsewhere in large cities where industrial processes generate high volumes of toxic gases such as sulfur dioxide which can lead to respiratory problems if inhaled over long periods time periods.”

How does timber floor sanding work?

The steps for any timber floor sanding job are as follows:

  • Preparation. The first step is to thoroughly clean the floor, removing all dust and dirt from it. If you have existing stains or marks on your timber floor, these should be removed before starting the sanding process.
  • Sanding. Your timber floor will then be sanded using a machine that uses either diamond-tipped or aluminium oxide pads to remove all of the old varnish and other coatings from your timber floors so that they can be cleaned properly and given new coats of varnish or polyurethane oil. This process helps to ensure that your finished product looks good and lasts longer than if you were just to leave them with no coating at all!
  • Finishing & polishing. Following this stage, there might be some small imperfections left over from the previous stages which need to be fixed up before finishing touches can begin (such as buffing). Once this is done though we recommend using our waterborne topcoat sealer which provides excellent protection against moisture damage!

How do you apply the finish to the floor after sanding?

Once you’ve sanded the floor, it’s time to apply the finish. Before you do so, make sure that you have a well-ventilated area for spraying and that you wear a mask or respirator to keep from inhaling any fumes. You can choose between polyurethane or oil finishes; both are equally durable and long-lasting.

To apply your chosen finish, first use a floor machine with pads attached as needed (for example, if your wood is dark but has light graining) in order to spread an even layer of product across all areas of the floor before spreading another layer manually with an applicator pad. Allow this second layer of finishing material to dry overnight—it should be dry enough for walking on when it’s dry enough for walking on!

What type of finish will be applied to my timber floor, and what is its life expectancy?

Different finishes have different life expectancies. The finish you select will determine how long your floor will last, as it has to be maintained properly throughout its lifetime.

There are three types of timber floor finishes: oil, wax and lacquer. Each will add a beautiful patina and depth to the timber but they all require regular maintenance in order to maintain their appearance over time.

Oil finishes need to be applied regularly (every 2-4 weeks) in order for them to remain effective and protect the timber from moisture damage or staining. If you live in an area where there is high humidity, such as a coastal location or somewhere with frequent rain storms then it is important that an oil based finish is applied as this type of protection offers better resistance against water penetration than waxes or lacquers which can deteriorate more quickly under wet conditions

Sanding and polishing your home’s timber floors can drastically enhance their appearance.

If you are looking to improve the appearance of your timber floors, sanding and polishing them can be a great way to do so. Sanding and polishing your home’s timber floors can drastically enhance their appearance. This process involves removing scratches, dents or other imperfections from the surface of the flooring material by using various grades of sandpaper that have been specifically designed for this purpose. The result will be an impressive shine once again, as well as easier cleaning methods when you need to remove dirt or grease from the surface.

So, whether you’re looking for Timber Floor Sanding Melbourne, the best way to do it is with an expert company help,

Related Post